2、箱體結構特性：

2.1 Box structure: the test box is made of  SUS304 stainless steel with a thickness of 1.0mm.

箱體結構：試驗箱箱體采用試驗室庫板**拼接而成，外部材質為厚度1.0mm的SUS304不銹鋼。

2.2 Test space: the internal test space will be made of non magnetic SUS-304 stainless steel with no paint. All the seams will be TIG welded and vapor tight. The surface will be well polished.

測試空間： 箱體內膽材料為SUS304號、厚度1.0的不銹鋼。所有縫隙都由TIG（鎢極惰性氣體保護電弧焊）無縫焊接完成，保證密封。表面被很好的刨光。

2.3  Insulation: the insulation material will be of low 'k' factor, high intensity and non hygroscopic nature. The insulation will be multi layered with double vapor barrier. Asbestos free mineral fiber insulation will be used and the thickness is about 120mm.

保溫材料：。使用低“K”值的*緣保溫材料，高強度和不可燃、不沉積特性。這種*緣材料為多層分層，每層兩面都有蒸汽*緣，厚度120mm。

2.4  Door:  double silicone seal, hinges and lock.

箱門：單開或雙開，根據需求定制，帶有雙層硅橡膠密封和門鎖。

2.5  Door useful dimensions:

門的有效尺寸：根據實際容積定制；

2.6  Inspection windows: the chamber will be provided with one multilayer toughened glass inspection windows with built-in heaters.;

The inspection window is equipped with an electric heating element on the surface of the glass able to prevent the condensate and frost formation;

觀測窗：箱體帶有一個多層玻璃觀測窗，帶有內部加熱器。；

玻璃表面的電子加熱可以防止水的冷凝和結霜；

2.7  Internal lighting: One lamp, with control switch placed on the control panel;

內部照明：1 個，控制開關在箱體外部控制面板上；

2.8  Cable port: Two portholes (Ф100mm), by low thermal conductivity materials and equipped with blind plugs.

測試孔：兩個直徑為100mm，帶有由*緣材料做成的*緣塞；（位于箱體左右兩側）

3、Air-conditioning System/空氣調節裝置:

3.1  Regulation and control: Forced circulation for temperature  regulation; Independent PID regulation to achieve consecutive cooling and heating capability; No energy waste deriving from extra heating to compensate extra cooling;

調節和控制：強制對流調溫調濕方式的冷端和熱端PID調節，熱量和冷量均可連續調節，避免了制冷量和加熱量而造成的能源浪費；

3.2  Air-circulation equipment: Powerful blowers driven by external motors with stainless steel shafts;

空氣循環裝置：帶有不銹鋼軸的外部電機驅動的高效率風扇；

3.3  Heating: Nickel-chromium alloy heating wire, controlled by SSR; protected by failure-safe thermostats;

加熱：鎳鉻金屬絲加熱器，SSR控制；配備故障保護溫度開關；

3.4  Cooling mode: Direct cooling;

冷卻模式：直接冷卻；

1.1 Heat exchanger: tube-finned heat exchanger which exchanges the heat with air inside the chamber

熱交換器：管片式熱交換器同室內空氣進行熱交換；

4、Refrigeration System/制冷系統:

4.1 Refrigeration System Composition:

制冷系統組成:

4.1.1 Refrigerant: environment-friendly fluorine coolant R404a & R23;

制冷劑：環保制冷劑R404a & R23

4.1.2  Consecutive capacity regulation capability;

壓縮機冷量連續可調：試驗過程壓縮機的制冷能力輸出連續可調，既保證試驗室的溫濕度控制精度，同時也節約了試驗室的運行能耗，防止冷熱量抵消而導致能源浪費；

4.1.3 Refrigeration compressor: German Bitzer

制冷壓縮機：德國比澤爾壓縮機

4.1.4  The compressed is equipped with electronic suction and discharge pressure sensor, this is convenient for error diagnosis and future maintenance; the pressure can be read on line;

壓縮機的吸排氣口都安裝有電子壓力傳感器，能夠實時的讀取壓縮機的高壓和低壓壓力，監控冷凍機組的運行狀態，對于可能出現的故障進行預判，減少設備的維修時間和周期，大大提高了設備的運行效率，方便客戶使用；

5、Control system/控制系統:

5.1 Sampling sensor/傳感器:

5.1.1 Temperature measurer and sensor: Shielded heat resistance Pt100 x 1;

溫度傳感器：Pt100鉑電阻x 1（德國賀利氏）

5.2  Controller/控制器:

5.2.1  Type of controller: MN-1000;

控制器型號：MN-1000

5.2.2  Language: Chinese;

語言：中文

5.2.3  M-M interface: 10.2” TFT liquid-crystal colorful displayer;

M-M界面：10.2” TFT液晶彩色顯示器

5.2.4  Setting: Touch panel method;

設置：觸摸面板方式

5.2.5  Resolution: Temperature: 0.1℃, Humidity: 0.1%RH; Time: 1min;

分辨率：溫度：0.1℃，時間1分鐘

5.2.6  Set-range: Temperature: -65℃～+110℃; 

設定范圍：溫度：-65℃～+110℃

5.2.7  User procedure capacity: 50 programmable programs, with maximal 60 steps(segments) in     each procedure, and the procedures is linkable;

程序容量：50個可編程程序，每個程序60步，程序可以鏈接；

5.2.8  Operation mode: Constant value operation, program operation;

運行方式：定值方式、程序方式

5.2.9  Experimental data display: Preset value, measured value, total operation time, segment operation time, segment remaining time, heating status;

試驗數據顯示：預設值，測量值，總運行時間，每一段的運行時間和剩余時間，加熱狀態；

5.2.10 Failure information: in abnormal case, display the failure status and possible reason;

故障信息：發生故障時，顯示故障狀態和可能的原因；

5.2.11 Equipped with LAN interface to PC;

配有LAN接口與計算機連接；

5.2.12 Advanced function: Timing operation, operation record, PID series subarea and PID series auto-adjustment, manifold offset,  online help;

上等功能：定時功能，運行數據記錄，PID分區和自動整定，偏差設定，網上幫助等；

5.2.13 Recording function: The memory of the controller can record the test curve and data, equipment status, alarm record and the data can be downloaded by USB;

記錄功能：控制器的內存能夠自動記錄測試曲線和數據，設備狀態，報警狀態等，并且能夠通過USB下載；配備歷史數據回放以及轉換軟件；